Ad Crucem Baptism Banners - Set of 2
Note: the dimensions of these banners are different from the other banners we sell. These banners are 3' x 4'. This banner set can be customized to other dimensions, if required.
"What shall we say, then? Shall we go on sinning so that grace may increase? By no means! We are those who have died to sin; how can we live in it any longer? Or don’t you know that all of us who were baptized into Christ Jesus were baptized into his death? We were therefore buried with him through baptism into death in order that, just as Christ was raised from the dead through the glory of the Father, we too may live a new life.
For if we have been united with him in a death like his, we will certainly also be united with him in a resurrection like his. For we know that our old self was crucified with him so that the body ruled by sin might be done away with, that we should no longer be slaves to sin— because anyone who has died has been set free from sin."
1 Peter 3:18-22
"For Christ also suffered once for sins, the righteous for the unrighteous, to bring you to God. He was put to death in the body but made alive in the Spirit. After being made alive, he went and made proclamation to the imprisoned spirits— to those who were disobedient long ago when God waited patiently in the days of Noah while the ark was being built. In it only a few people, eight in all, were saved through water, and this water symbolizes baptism that now saves you also—not the removal of dirt from the body but the pledge of a clear conscience toward God. It saves you by the resurrection of Jesus Christ, who has gone into heaven and is at God’s right hand—with angels, authorities and powers in submission to him."
Units: 1 x "Left" banner and 1 x "Right" banner.
Heavyweight poplin fabric that is very durable, and fully hemmed with two pole pockets at the top and bottom. It retains its vibrant color and shape whilst also being abrasion, chlorine, and pilling resistant over many years, especially if handled with care. This fabric may be hand washed and steamed.
- It is recommended to use a 1 1/8 dowel for the pole pockets at the top and bottom.
- Dowels are easily available from any of the home improvement stores and Ace Hardware. Select dowels that are straight!
- Sanding with 320 grit sandpaper will prevent any snagging when you slide the dowels into the pole pockets.
- Cut the dowels to the width of the selected banner.
- Insert self-tapping stainless steel eye screws at each end - 3/32" x 7/8" should be adequate.
- Hang the banners with 2.5 mm paracord in a color that most closely matches the hanging wall.
- After cutting the paracord to size, burn the ends with a lighter for a short time to prevent fraying.
- Knot the paracord to the eyelets and adjust the length until both banners are hanging at the same height.